บริการรับตัดวัสดุแผ่นทุกชนิด
ตัดชิ้นงานด้วยเครื่องตัดเลเซอร์ Laser cutting machine(LVD Sirius3015) Belgium Made
ความสามารถในการตัด เหล็ก 0-20 มม.
สเตนเลส 0-15 มม.
อลูมิเนียม 0-10 มม.
ขนาดของวัสดุที่รองรับได้ 5'x10'
ตัดชิ้นงานด้วยเครื่องตัด Water Jet(เครื่องตัดวัสดุด้วยกำลังน้ำ)
ตัดวัสดุได้หนาสุดที่ 180 MM. และ ขนาดใหญ่สุดที่ 4M.x2M.
สามารถตัดได้ตามแบบที่ลูกค้าต้องการทุกรูปแบบและทุกวัสดุด้วยความเที่ยงตรงแม่นยำในระบบคอมพิวเตอร์
ตัดแผ่นโลหะด้วย เครื่องตัดกรรไกร
ตัดวัสดุได้หนาสุดที่ 6 MM.และหน้ากว้างสุดที่ 10 ฟุต
สำหรับรายละเอียดท่านสามารถดูได้ที่หัวข้อด้านล่าง ส่วนข้อมูลเพิ่มเติมในการสั่งตัดโปรดติดต่อสอบถามที่
เบอร์ 086-5390809, 081-3390133, 081-9187494 หรือ e_mail แบบและรายละเอียดมาที่ service@metalphile.com ครับ
We have owned our processing equipments on-site to serve our client with specification requirement.
Laser Cutting Service
Laser cutting machine has been in industry since 1965. The first Laser cutting use for drilling holes in diamond dies. Industrial laser cutters are used to cut metal mostly stainless steel, steel and aluminum flat sheet.
We are now launching new laser cutting machine which made from Belgium, LVD Brand to serve our customer. LVD Laser cutting machine will be able to cut steel thickness up to 20 millimeters, stainless steel thickness up to 15 millimeters and aluminum thickness up to 10 millimeters.
The machine is also capable to take up maximum sheet size 1500x3000 mm.
Model: LVD Sirius 3015
Technical specification:
Laser type |
Fanuc HF exited Co2 Laser |
Laser power |
4000 W |
Maximum sheet size |
3050x1525mm |
x-axis travel |
3100mm |
Y-axis travel |
1575mm |
Z axis travel |
250mm |
Maximum sheet weight |
750 Kg |
Maximum position speed x-y |
120m/min |
Repetitive Accuracy |
+/- 0.025mm |
Positioning Accuracy |
+/-0.05mm/m |
Smallest Programmable increment |
0.001 |
For more information about the machine please go to www.lvdgroup.com
Waterjet Cutting Service
Recently, water jet cutting machine was used for many cutting industries. It is most commonly use for cutting aluminum, copper, brass, glass, plastic, rubber, titanium and more. The water jet streams generated are able to cut material thickness ranging from 0.001” up to 12”. Water jet can cut any 2-D shape, sometime handle 3D material cutting such as a logo, alphabet, number and animal picture as your requested.
Normally, water jet cutter use pressurized water to cut material however, to increase cutting ability, abrasive are added. Most common abrasive use is garnets, sapphire, ruby or diamond. Abrasive water jet offers many advantages as follow:
- No heat affected zone on the edge
- Burr-free
- No distortion and warping
- Material thickness of 0.002” to 8” can be cut
- Flexibility
We are now launching abrasive water jet cutting machine, which will be able to serve our customer for more required, and alternatives .
We accept all materials bring by our customer to be cut by the machine and also we can arrange metal material to our customer for more convenience.
Model: Flow WJP4020
Specifications